
Service and Maintenance (cont.)
Removing the Fan & Motor. (Section 8)
Note:- It is recommended that, every three months, oven fan be removed, cleaned and refitted by a
qualified service engineer, to prevent excessive carbon build-up which can impair performance. At the
same time it is advisable to remove oven linings and clear any carbon build-up behind them.
1) Remove all the oven furniture.
Fig. 8
2) Remove two screws (A) and withdraw flue duct (B).
3) Remove four nuts (C) and lift fan guard (D) off retaining studs.
4) Slacken two-grub screws (E) and draw fan (F) off motor spindle (G), if required.
Fig. 9
5) Remove four screws (A) and pull motor (B) through oven back, complete with motor plate (C) and
wiring (D).
Fig. 10
6) Remove two screws (A) and cover plate (B) from motor wiring box.
7) Disconnect wiring, noting their positions and remove wiring sheath (C) by unscrewing cable
gland (D).
8) Remove four self-locking nuts (E) and spacers (F), and detach motor plate (G) from motor (H).
9) Replace by reversing the above procedure.
Manual Part No: 930087-01 SNORKEL Gas Convection Oven - 32 –
Manual Rev No: 1
Fig. 8
Fig. 9 Fig. 10
Kommentare zu diesen Handbüchern